8
EYEXO INSTALL GUIDE
Ladder
Phillips
Screwdriver
M4 32mm
Screw x9
Bracket
Sensor Bar
Section 1 “Installation Requirements,” and outline
bracket location on ceiling.
Consult with building manager or landlord about
before installation. The sensor and bracket are
approximately 30 lbs and 9 M4 32mm screws are
required to screw in the bracket and hold the sensor.
Failure to do so may result in serious injury or
damage to property.
Two or more persons are recommended for
mounting the bracket on the ceiling and extreme
caution is required while on the ladder. Failure may
result in serious injury or damage to property.
3. Hardware Install
WARNING
WARNING
CAUTION
Necessary Tool
Necessary Part(s)
Hardware
