9
EYEXO INSTALL GUIDE
1
The EYEXO Sensor and bracket come attached together in the box. Slightly
loosen the black M6 15 mm screws that are holding the sensor to the
bracket so you can remove it. Please make sure you have measured 3.5 feet
from the front and middle of the sensor to your tee position. Do NOT align to
the bracket.
3
With the bracket in position, grab the 10 silver M4 32mm screws and screw
them in the locations below in the diagram.
3.1 Hardware Install - Continued
Step 1: Mount Bracket
Hardware
2
Place the ladder under the ceiling mounting position. Climb the ladder to a
hinges facing down towards the ground. The longer side of the hinges must
be closest towards the hitting screen.
M9 32mm (5)
M9 32mm (5)
3.5’
