O
PERATING
I
NSTRUCTIONS
MAXIMAT
TC4
S
IGNALLING
D
EVICE
BAMO IER GmbH
Pirnaer Str. 24
D-68309 Mannheim, Germany
Phone: +49 (0)621 84224-0
Fax: +49 (0)621 84224-90
www.bamo.de
SU3312a.doc 03/15
1
Installation, initial start-up and maintenance may only be performed by trained personnel!
The device may only be connected to power which complies with the specifications included in the
technical data and on the serial plate!
The device must be disconnected from all sources of power during installation and maintenance work!
The device may only be operated under the conditions specified in these operating instructions!
Functions Description:
The MAXIMAT TC4 is a signalling device for up to 4 MAXIMAT C… series overfill inhibitors / leakage sensors with
optical and acoustic indication in accordance with approval guidelines for overfill inhibitors (ZG-ÜS). If an alarm
signal is generated by one of the overfill inhibitors or leakage sensors, this can be indicated optically and/or
acoustically by the MAXIMAT TC4.
Technical Data:
Supply power:
230V AC, 50 to 60Hz, alternatively 24V DC ± 20%
Power consumption:
Approx. 6VA / approx. 6W
Ambient temperature:
-20 to +60°C
Protection per EN 60 529:
IP65
Inputs:
4 each overfill/leakage sensor
1 external reset contact
Outputs:
4 floating changeover contacts, assigned to the individual sensors
1 floating changeover contact for group alarms
1 floating changeover contact for the external buzzer
* Note:
The function test does not replace the operating test specified in ZG-ÜS, section 6.2, which must be conducted on a regular basis at
least once a year.
Contact rating, output relays:
250V AC / 115V DC
500VA / 3A
Terminals:
Max. wire cross-section of 2.5 sq. mm
Safety Precautions:
