When you receive your Mag 8e System the transmitter will have
already been activated, preprogrammed at 19 kHz, and paired
and calibrated with the receiver. The receiver and display will
have been paired and set to channel 1.
2
5
4
3
Walk bore-path and use depth
forecasting to check for
interference and select frequency.
Page 14
Install batteries into transmitter.
Install battery cap with provided
battery cap tool.
Turn on display by holding power
button until the Mag logo is visible
on screen.
Page 43
Page 27
Install transmitter into the housing.
Turn on receiver by holding power
button until the Mag logo is visible
on screen.
1
Page 8
Page 5
