Rotate drill head until roll
indicator points toward target
dot. Instructions will change
from the clockwise arrow to
“STOP”.
Hold this position until “H”
counts down to 0.
Rotate drill head to next
position in sequence before “P”
counts down to 0 or the
sequence will be canceled.
If the next step has the target
dots in the same place as the
previous step, rotate the drill
head one entire rotation until
the roll indicator lines up with
the target dots again.
Once all six steps of the
sequence are complete,
change the Transmitter
Settings on the receiver to
match the new frequency and
power levels.
Page 16
Page 31
