Warning:
Even if the
transmitter’s roll, pitch, battery status and
temperature are displayed correctly, calibration may not be
reliable due to a distorted magnetic field.
1. Make sure that the transmitter is working properly.
Place it in the housing.
2. Place housing containing the
transmitter in a location away from
interference.
3. Set transmitter and receiver 3
meters apart from center of transmitter to inside edge of
receiver’s base, as shown.
(10 or 20m should only be used
when drilling at extreme depths)
4. Tap
to enter
Calibration and Depth
Forecast Page.
Always
do 3m calibration first.
5. Tap
once to enter
Calibration Page, and
twice more to begin
calibration.
8. Calibration complete.
7. Tap
to return to Main
Page.
Page 12
Make sure pitch is 0% during calibration. If pitch is not 0%, displayed depth
will not match calibration distance until pitch is changed to 0%.
