background image

23

FCC DECLARATION OF CONFORMITY

Declares that the product:

Product Name: AstraCam 1000

Model No.: DC-D2 (or) HB80

FCC Rules: Tested to comply with FCC Part 15, Class B

Operating Environment: For home or office use.

FCC Compliance Statement:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must
accept any interference received, including interference that may cause undesirable operation.

Information to user:

This equipment has been tested and found to comply with the limits of a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protections against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception (which can be determined by turning
the equipment off and on) the user is encouraged to try to correct the interference by one or
more of the following measures:

Reorient/relocate the receiving antenna.

 

Increase the separation between the equipment and the receiver.

 

Connect the equipment to an outlet different from the one to which the receiver is
connected.

 

Consult the dealer or an experienced radio/TV technician for help.

Caution:

Changes or modifications not expressly approved by the manufacturer responsible for
compliance could void the user's authority to operate the equipment.

The party responsible for the product compliance:

Corporate Name: UMAX Technologies, Inc.

Address:  3561 Gateway Blvd., Fremont, CA 94538, USA

Person responsible for making this Declaration:

Position/Title: President

Signature: 

Summary of Contents for PowerLook 1000




























Reviews: