6.
8.
7.
9.
Before securing the next collector to the roof, connect an additional collector to the row using the plastic panel
clamp. This allows you to lift up the header of the adjacent collector when connecting the two collectors together.
Follow the procedures listed above until all collectors are connected to each other and anchored to the roof.
Install bottom mounting pads.
After all collectors are anchored to the roof, connect the bottom headers together with additional plastic panel
clamps.
8. Mounting the Solar Panels
Using eco-SPARK Mounts.
- Cont.
The S Roof Mounting Pad is made up of two parts: top and bottom. Please use the following information as a guide for installation.
The bottom S Roof Mounting Pad set is created from two separate parts:
Slider
Track
Slider and Track Assembly Together
MOUNTING THE SUNSTAR PANELS USING SUNSTAR MOUNTS.
-
15
Fig. 8.2
INSTALLATION MANUAL eco-SPARK™ SOLAR POOL HEATER
©
2015 UMA Solar
