19
YK18-0012-AI-101-02
3.1.2 Environmental condition for storage
If the machine is stored in a warehouse or an anterior chamber before installation, or the machine is
not used for a long time, store the machine following to the conditions listed below.
Ambient temperature
From -20 to 60
℃
(no freeze)
Ambient humidity
80% RH or less (no condensation)
Altitude
Altitude of 1,000 m or less
Vibration resistance
0.5 G (114 dB) or less for the vibrational acceleration
Others
No dust shall be found
It shall be inside of a ventilated room.
The machines shall not be stacked, toppled sideways, or stood upright.
The machine shall not be given impact.
The machine shall not be exposed to the direct sunlight.
The machine shall be kept away from a heat source.
The machine shall not be tilted for 10 degrees or more.
3.1.3 Environmental condition for installation and operation
This machine includes precise clearances.
For installation and operation of the machine, make the following matters satisfactory.
Ambient temperature
From 10 to 35
℃
Ambient humidity
80% RH or less (no condensation)
Altitude
Altitude of 1,000 m or less
Others
No corrosive or explosive gas shall be found.
No dust shall be found
It shall be inside of a ventilated room.
The machines shall not be stacked, toppled sideways, or stood upright.
The machine shall not be given impact.
The machine shall not be exposed to the direct sunlight.
The machine shall be kept away from a heat source.
The machine shall be installed horizontally.
The machine shall be definitely fixed in preparation for an earthquake.
The machine shall not be tilted for 10 degrees or more.
▶
Installation
