© 12/2006 UltraVolt HV Rack System Installation and Operators Manual, Rev A
20 of 23
APPENDIX A
SPECIFICATIONS
CAUTION:
ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMERS ARE NOT NOTIFIED WHEN CHANGES OCCUR UNLESS THEY
HAVE ARRANGED FOR CONFIGURATION CONTROL WITH ULTRAVOLT’S
CUSTOMER SERVICE DEPARTMENT (“CSD”) THROUGH THE “-Q” SUFFIX
PROGRAM. ONLY THOSE ITEMS OF GREATEST SIGNIFICANCE WILL BE
POSTED ON ULTRAVOLT’S WEB SITE, IN THE PRODUCT-CHANGE NOTICE
SECTION.
Since each channel of the
UltraVolt HV Rack
®
system is custom configured with a specific model of
UltraVolt
®
high-voltage power supply, the end user should refer to UltraVolt’s datasheet for the electrical specifications of that
model.
Storage Temperature
Storage temperature range is -55C° to +105C°.
Operating Altitude, Humidity & Temperature:
UltraVolt HV Rack
Series operating performance is guaranteed between sea level and 10,000ft in non-
condensing relative humidity up to 95% between temperatures of +10°C and +40°C.
Shock and vibration
TBD
AC Power
The AC input power is universal auto-ranging. It operates between 85 to 250VAC at 47 to 63Hz. The power
entry module is EMI/RFI-filtered, IEC 320/C20 inlet.
Fuse
AC power is fused through a 5mm x 20mm, time-delay fuse located on the rear panel. The fuse must always be
replaced with the same type and rating, as per the
UltraVolt HV Rack
power supply’s rating label.
HV connectors
The
UltraVolt HV Rack
system is equipped with a configurable output plate for each high-voltage output
channel. Each rack can have custom-configured high-voltage output and return connectors, according to
customer requirement. The basic
UltraVolt HV Rack
system includes Alden B110US 40kV industrial high-
voltage output connectors and a two-way binding post return for each channel.
Package
Chassis dimensions: 17.00” wide x 18.50” deep x 5.00” high (431,8 x 469,9 x 127,0mm). Width is measured
chassis side to opposite side; depth is measured from the back of the front-panel mounting flange to chassis
rear and does not include rear-panel connector protrusion; height is measured chassis top to chassis bottom
and does not include the height of rubber feet mounted on the bottom.
Front-panel dimensions: 19.00” wide x 0.125” deep x 5.25” high (3U) (482,60 x 3,18 x 133,35mm). These
measurements do not include handles or controls. Front-panel mounting holes are configured for both #10-32
and M6 rack configurations.
Weight: Approximately 30 pounds (11,2kg), configuration dependent; approximately 40 pounds (14,93kg)
shipping.
