background image

 

 

 

UltraVision Security, Inc. • Salem, New Hampshire  03079 USA • Tel 866.374.9732  • 603.685.0303  • Fax 603.898.1840 

www.UltraVisionSecurity.com • [email protected] 

Rev 031109 

1

UltraSensor   Security System User Manual

 

 

Table of Contents 

 

Product Overview.......................................................................................................................................................... 2 
Server-24 ....................................................................................................................................................................... 4 
Server-8 ......................................................................................................................................................................... 5 

USB connection ................................................................................................................................................... 6 
Ethernet connection ............................................................................................................................................. 6 

Installation Guide .......................................................................................................................................................... 7 

Ethernet Cable Installation................................................................................................................................... 7 
CMD Cable Assembly ....................................................................................................................................... 11 
Wire Diagram .................................................................................................................................................... 12 

Configuration Manager Software ................................................................................................................................ 14 

Start-up .............................................................................................................................................................. 14 
Create /Edit Users .............................................................................................................................................. 16 
Change Password ............................................................................................................................................... 17 
Delete User ........................................................................................................................................................ 17 
Configure Sensors.............................................................................................................................................. 18 
Delete a sensor ................................................................................................................................................... 19 
Configure System .............................................................................................................................................. 20 
Set Map Scale .................................................................................................................................................... 21 
Configure Sensor using Monitor Screen ............................................................................................................ 21 
Configure Contacts ............................................................................................................................................ 22 
Contact Closure Detail ....................................................................................................................................... 23 
Monitor Screen .................................................................................................................................................. 23 
View Log File .................................................................................................................................................... 25 
Configure Alarm Mass Threshold (Sensitivity) ................................................................................................. 26 
Logout................................................................................................................................................................ 26 
Software Updates ............................................................................................................................................... 26 

Sensor Specifications................................................................................................................................................... 27 
Integrating the CMD-Server 24 with your network..................................................................................................... 28 

Changing the CMD-Server IP address............................................................................................................... 28 
Accessing the CMD-Server over a WAN .......................................................................................................... 29 

Integrating the CMD-Server 8 with your network....................................................................................................... 30 

Changing the CMD Server-8 IP address ............................................................................................................ 30 
Accessing the CMD-Server over a WAN .......................................................................................................... 30 

Remote Switch Device ................................................................................................................................................ 32 

Installation ......................................................................................................................................................... 32 
Running the Application .................................................................................................................................... 33 
Removing the Application ................................................................................................................................. 35 

Dry contact switch specifications for Server-8............................................................................................................ 36 
Dry contact switch specifications for Server-24.......................................................................................................... 37 
Problem Solving .......................................................................................................................................................... 38 
Install MS .NET framework and Java ......................................................................................................................... 39 
Allow a remote PC to fully communicate with a Server-8.......................................................................................... 40 
Release 10.9 Notes ...................................................................................................................................................... 41 

Upgrade Process ................................................................................................................................................ 41 
Graphical User Interface (GUI) Changes........................................................................................................... 41 
Server Changes .................................................................................................................................................. 42 

Technical Support........................................................................................................................................................ 44 
Contact information..................................................................................................................................................... 44 

®

 

Summary of Contents for UltraSensor CMD-2













































Reviews: