UTT-110B VOIP Gateway (SIP)
User manual
Copyright
©
2013, Shenzhen Ultrative Technologies Co., Ltd All rights reserved
40
Figure 5-14 Port configuration
4.
And so on
，
select “6002” as the hotline number for port 10, 6003 as hotline number for
Port 11, 6017 as hotline number for port 25, 6024 as hotline number for port 32.
5 Enter “call path” configuration interface, edit
‘Digitmap_Default’item, add a call rule
named “6xxx”, route OP is 127.0.0.1 (
Terminal loopback)
，
as following figure(Figure
5-15):
Figure 5-15 Edit call path
6. After the above configuration is finished, when dialing the PSTN number
connected to FXO port through the PSTN number, the S port telephone in
corresponding hotline will ring, and after off-hook in S port, normal talk with the
telephone in PSTN side is ok.
Scene Summary
:
This scene described the application when PSTN->FXO->FXS, the S+O port
equipment through local FXO route to local FXS
The expanded application for this scene:: If you need route the call from local FXO port
to other IAD equipment or soft switch platform, in hotline mode, you only need set the
route IPof corresponding call rule of the hotline as the IP address of other IAD equipment,
and the other IAD equipment or soft switch platform also need be able to receive the
point to point calls from this S+O port equipment.
All manuals and user guides at all-guides.com