UTT-110B VOIP Gateway (SIP)
User manual
Copyright
©
2013, Shenzhen Ultrative Technologies Co., Ltd All rights reserved
25
3.5.1 Port Basic Settings
Click Port Basic Settings, then WEB interface shows as below,
Figure3-10 Port1Basic Settings
Table 3-8 Port 1Basic Settings
Port Basic
Settings
Description
Caller ID
Mode
Default
FSK,
while supporting
DTMF,
Caller ID is not required, Can
be set to off
Voice Codec
Priority
Priority
defaults
G711A,
while support is down by
priorityG711U/G929/G723
so on.
Length of
Audio
Packagin
The default value is
20ms,
support auto-negotiation.
Input volume
Set the port input volume
size.
Output
volume
Set the size of the port output
volume.
Do Not
Disturb switch
When turned
on,
the port open DND; closed, shut down the port
Disturb feature.
Call waiting
switch
When turned
on,
the port open call waiting function;
Whenclosed, the port turn off call waiting feature.
Hotline switch
When turned
on,
the port opens hotline function; When closed,the
port is closed hotline function.
Hotline
number
After the switch is turned
hotline,
enter the hotlinenumber.
Hotline delay
The default value is
0
seconds for immediate hotline way; modify
the default value other for the delay Hotline way.
Hook
FLASH
switch
When turned
on,
the port open for Hook Flash function; On the
contrary, when turned off, all relevant functions goes off.(
Including:
Call Waiting. Call Hold(RFC2543 or RFC3264) 3 way Calling, Call
Transfer Unattended/Blind)
All manuals and user guides at all-guides.com