UTT-110B VOIP Gateway (SIP)
User manual
Copyright
©
2013, Shenzhen Ultrative Technologies Co., Ltd All rights reserved
37
Figure 5-9 Edit call path
Figure 5-10 Edit call path
Figure 5-11Edit call path
8 After finish the above configuration, FXS port off-hook and dial 9, you can hear
secondary dialing tone(the secondary dialing tone is released by the phone wire of FXO
port),
redial and the called number is out
.
Scene summary
:
This scene described the configuration method of FXS port out through FXS port for
the FXS+FXO port equipment. The out number is 9, and this out number can be amended
according to actual requirement. In this scene we band number 9 to all the FXO port for
the equipment and form to a group for number 9. You can also set different numbers
banding to different FXO ports and form to multi number group. And you can dial different
number group and go out throughdifferent FXO port.
The Expanded application for this scene: If the FXS port which is not local FXS port need
go out through FXO port, such as another IAD equipment or soft switch, you can send
the called number 9 to the S+O equipment, and after hearing the secondary dial tone
from FXO port, and then enter the called number out.
All manuals and user guides at all-guides.com