UTT-110B VOIP Gateway (SIP)
User manual
Copyright
©
2013, Shenzhen Ultrative Technologies Co., Ltd All rights reserved
22
PSTN number; closed to display the number of FXO port number.
3.4 CallPath
In WEB setting interface, Select” Call Path”, users can see a default “DigitMap-Default”,
besides this default Call Path, user can manually add his own. So far we support
maximum 4 different call paths. Each call path can set different rules in order to control its
authorities,( Local Calls, Long Distance Calls, Oversea Calls). When the call path is set,
users can go to “Port Settings”
Æ
”Basic Settings” to choose the one to activate, as shown
below:
Figure3-7 Call Path Setting Interface
By Clicking “Edit”, User can check the detailed rules, call rules are consisted by
“0-9, .,*,#,X”(represents number 0-9,)and []” For example, [1,3,4-6,9]=13,4,5,6,9.
When Routing IP is 0.0.0.0, then the call will be sent to the server address edited in
“SIP Settings; If the routing IP is a specified IP then the calls will be forwarded
accordingly(p2p), as below.
3.4.1 Add a call path
Click in the bar “Path File Name”,fill in the right information,“Submit”then job done,
multiple call rule adding supported. As show in the interface below
Figure3-7 Add a call path interface
All manuals and user guides at all-guides.com