manualshive.com logo in svg

Ultrative UTT-110B Series, User Manual, Page: 11 / 40

Share
Download
Ultrative UTT-110B Series User Manual Download Page 11

                     

 

UTT-110B VOIP Gateway (SIP) 

User manual

 

        Copyright

©

2013, Shenzhen Ultrative Technologies Co., Ltd All rights reserved                    

11

 

 

 

Figure 2-4    UTT-110B

 

Series Integrated Access Device as a proxy server connection 

2.7 Network Access Configuration 

Firstly confirm the connection: WAN port UTT-110B Series integrated access devices 

support PPPoE, dynamic IP address or a static IP address mode 

2.8 Log-in to the WEB Configuration Interface 

1) selection has a computer card and TCP / IP protocol installed, the 

computer and UTT-110B Series Voice over IP integrated access device's LAN 
port to connect to a hub or switch with a network cable, network cable can also 
be used to connect directly to the computer and the LAN port.

 

2) Turn on the computer "My Network Places" and "local connection",

 

right 

click and choose Properties. Below, the IP address of the computer with 
UTT-110B Series Voice over IP integrated access device's LAN port IP 
address is configured on the same network segment. (UTT-110B Series The 
factory default LAN port IP voice integrated access device is IP 
is

192.168.11.1,

 subnet mask is 

255.255.255.0.)

 

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for UTT-110B Series









































Reviews:

No comments