background image

FCC Information

Your TDD Detector complies with the regulations for a
Class A computing device as specified in Subpart J of
Part 15 of the FCC Rules. These rules are designed to
minimize radio frequency interference in residential
installations. 

Your TDD Detector
generates radio frequency
energy, and may cause radio
or television interference.

Reorient the radio or television receiving antenna.

Move your TDD Detector away from the receiving

antenna.

Move your TDD Detector away from the radio or

television.

If necessary, consult an experienced radio/television

technician for additional suggestions.

If radio frequency
interference occurs, try to
correct it:

The label on the bottom of your TDD Detector presents
the following required information. You must, if your
Telephone Company requests, provide this information:

FCC Registration Number: 

D8K7IB–19552-MD-N

Ringer Equivalence Number (REN):

0.5A

Your TDD Detector complies
with Part 68 of the Federal
Communications
Commission (FCC) Rules.

Use registered jack type USOC #RJ12C. This jack is a
modular outlet that you can order from your local
Telephone Company or telephone supply store. 

FCC Rules do not permit you to connect your TDD
Detector to a pay telephone. Connection to party lines is
subject to local Telephone Company regulations.

Use a Telephone Company
registered jack to connect
your to the nationwide
telephone network.

There is no guarantee that radio frequency interference
will not occur during use. You can determine if your TDD
Detector causes interference to radio or television
reception by disconnecting and reconnecting it while your
radio or television is on.

Use your TDD Detector in
strict adherence with these
instructions.

Use the Ringer Equivalence
Number (REN) to determine
how many direct connect
devices you can connect you
your telephone line.

Add up the REN numbers of all the direct connect
devices plugged into your phone line. This includes
telephones, direct connect TTYs, or products such as
your TDD Detector that plug directly into the phone line.
In most, but not all, areas of the country the sum of the
RENs should not be more than five (5.0). (Contact your
local Telephone Company to determine the maximum
REN for your local area.) If you plug too many devices
into your phone line, some of them may fail to ring when
someone calls you.

Know the rights of your
Telephone Company.

Your Telephone Company may make changes in its
facilities, equipment, operations, or procedures that could
affect the proper functioning of your TDD Detector. If this
happens, they will notify you in advance to give you the
opportunity to maintain uninterrupted service.

If your TDD Detector causes harm to the telephone
network, your Telephone Company has the right to
discontinue your service temporarily. If possible, they will
notify you in advance. But if advance notice is not
practical, they will notify you as soon as possible. You
will have the opportunity to correct the situation, and
you will be informed of your right to file a complaint with
the FCC.

Summary of Contents for TDD Detector

























Reviews: