TROUBLESHOOTING ASCII CALLS
If you do not receive a clear message during an ASCII call, try:
•
Changing the parity setting to correct garbled strings of text.
•
Changing the duplex setting to correct no characters or double characters
appearing when you type.
•
Changing the baud rate (110 or 300).
•
Changing the ASCII (ORIGINATE/ANSWER) setting.
If the code option is set to automatic and your Superprint Pro80 LVD loses the ASCII
connection,
NO ASCII CONNECTION
is displayed and Baudot is used.
If the code option is set to ASCII and your Superprint Pro80 LVD loses the ASCII
connection, it waits until the other person changes to ASCII or until you change the code
option setting to automatic or Baudot.
If you are unable to make an ASCII connection, check to make sure your ASCII seek time
is set to at least 3. You can also try increasing the seek time.
6 2 • U S I N G C O D E S
Summary of Contents for SUPERPRINT PRO80
Page 48: ...42 USING AUTO ANSWER...
Page 54: ...48 USING VOICE CARRY OVER...
Page 58: ...52 USING VOICE CARRY OVER...
Page 78: ...72 SPECIFICATIONS...
