Ultratec SUPERPRINT PRO80, Using Manual

Page: 39 / 82

SAVING A NEW MEMO
1.
Turn on the Superprint Pro80 LVD.
2.
Hold down the key and press .
EDIT MEMO>
is displayed.
3.
Type a name for your new Memo (8 characters maximum). The name cannot be the
same as any other Memo name already stored.
4.
Press . The name of the new Memo is displayed.
5.
Type the message you want to save for this Memo. You can use the keys to
move around in the message and the key to delete parts
of the message.
6.
Press .
** MEMO SAVED **
is displayed.
USING MEMOS
1.
At any point during a conversation when it is your turn to type, press .
SEND MEMO>
is displayed.
2.
Begin typing the first few letters of the name of the Memo you want to send.
When you have typed enough letters, the whole name is displayed. If you don’t
remember what name is used for the Memo, you can use the
keys to look
through the list of Memos.
3.
Press when the name of the desired Memo is displayed. The Memo is sent
and displayed the same way it would be if you were typing the message during the
conversation.
4.
Continue the conversation.
Enter
Send Memo
Enter
Back Space
Enter
Send Memo Program
USING MEMOS
CHAPTER
5
U S I N G M E M O S • 3 3
What is a Memo?
A Memo is a short message that you save in the Superprint Pro80 LVD
memory and later send to someone during a conversation. This can save
time typing during a call because you save Memos ahead of time. Some
examples of Memos might be a list of your favorite toppings for ordering
pizza or a message you need to send to several different people.