Ultrasonix SONIX Series Service Manual Download Page 74

Page: 74 / 136

8.3 CONSOLE

SERVICING

8.3.1

Removing the Console

Tools required:

#2 Philips screw driver

10mm

wrench

2.5mm Allen key

1. Power off the SONIX system and unplug it from the power outlet.

2. Remove the right plastic cover under the Console by unscrewing the four (4) Philips

screws at the top and the two (2) Allen bolts on the right hand side.

Note: The four (4) Philips screw covers will need to be removed first in order to access

the actual screws.

3. Unplug the cables from the Ultrasound modulo through the access panel.

Note: Because some of the cables are not labeled, use masking tape to mark and label

them.

4. Use the 10mm wrench to remove the bolt that grounds the Console wiring harness to

the Modulo.

Chapter 8: Field Service Components

SSM – 001, Revision F

SONIX Service Manual

Summary of Contents for SONIX Series









































































































































Search results

Summary of Contents for SONIX Series

Reviews:

Related manuals for SONIX Series

Brands by name

Popular brands

Ultrasonix SONIX Series, Service Manual

Search results

Summary of Contents for SONIX Series

Reviews:

Related manuals for SONIX Series

Brands by name

Popular brands