Ultrasonix SONIX Series, Service Manual

Page: 47 / 136

CHAPTER 6: CONNECT PERIPHERALS
6.1 B&W OR COLOR THERMAL PHOTO PRINTER
Connect the BNC connector from "B&W (Video) Out" or "Col (Video) Out" (on the Back
Connectivity Panel) to the "Video In" connection on the printer.
Note: In the top panel, the video splitter’s green plug is for B&W and the blue plug is for Color.
The system may have a T-connector attached to the green plug and blue plug allowing for a
direct connection and a cleaner look.
1. Press the console MENU button.
2. Click on Admin... > Peripherals > VCR/Photo .
3. Ensure
Enable Video Out
has been selected.
Note: Without a remote trigger, press the Print button on the Video Printer (i.e.
Thermal Printer).
6.2 REMOTE TRIGGER
Open the Top Panel. You should see there are two BNC plugs, please connect one end of the
Remote Trigger cable here. If you are standing facing the back of the machine, the closer one, is
the Print BNC (Trigger - Connection 19 in section
3.2.6 Connectivity Panel Check ).
The other end of the Remote Trigger cable is a stereo mini plug. It goes to the back of the printer
1. Press the console MENU button.
2. Click on
Admin... > Print Keys
.
3. From the Print tab, select the desired print key ( Print 1, 2 or 3 ), check Trigger and
press OK .
4. When the corresponding console PRINT button is pressed, the Thermal Printer should
print.
SONIX Service Manual SSM – 001, Revision F Chapter 6: Connect Peripherals
39