Ultrasonix SONIX Series, Service Manual

Page: 40 / 136

Mode Default Applicable Command Default Programmables
All Modes
•
TGC
•
Annotation
•
Transducer Selection
•
Patient Management
•
Cine Loop
•
Freeze
•
Cine Loop Record
•
Measurement
•
Mouse Wheel
•
Print
•
Optimization Mode DR
•
Optimization Mode
•
LD
•
Persistence
•
Gain
1. Optimization Mode
2. Sector Size/Zoom
3. Optimization Mode DR
4. Wide Mode
The current mode is identified with an ORANGE LED. Applicable console operations are identified
with a BLUE LED or a PURPLE LED for QUAD. Adjust the image with the console controls and
verify the operation corresponds with the controls. Note any operations that do not function
properly.
4.3 IMAGE TEST
1. Connect each of the different transducers available and run B mode.
2. Verify that the image scanned has all elements present. Note any black static line(s)
that are visible on the image.
3. If found, test with the other transducers to verify the non-visible element(s) is in the
same location.
4. Try different transducer connectors to eliminate the possibility of a malfunctioning
transducer.
Chapter 4: Performance Test SSM – 001, Revision F SONIX Service Manual
32