Carabiner opening (gate)
Figure 1
Structure of the carabiner hook
Joint
Lock-swivel nut
Loop
4.1 Using the carabiner hooks
A ring with a snap hook is attached to each of the four straps to attach the transport
suspension to the corresponding stretcher, if necessary using a loop (in combination with
a basket stretcher).
To open
the carabiner hook, fi rst turn the lock swivel nut by 1/ 4 turn to the side. The gate
can then be opened.
To close
, take your thumb away from the carabiner opening. The fuse closes audibly. This
avoids unintentional opening of the snap hook. Make sure that the carabiners are secured.
4.2 Attaching to the basket stretcher
1. Before attaching the transport suspension, fi rst detach the pulley system from the
central lower eyelet of the rigging plate (Fig. 2).
2. 2. Attach the carabiners that originate from the strands A and B of the rigging plate to
Figure 2
Detaching the fl uff pull system from the rigging plate
15
