20
KRMU000003
REV A - 07/20/01
CONVENTIONAL VCR TIMER RECORDING,
continued
5. Press ENTER once you have made your choice.
6. The hour numbers of the start time will flash.
Press the ADJUST buttons to set the hour when recording
is to start. Press ENTER.
7. The minute numbers of the start time will flash.
Press the ADJUST buttons to set the minutes when
recording is to start. Press ENTER.
8. Set the stop time the same way as the start time, using
steps 5 and 6.
9. Press the ADJUST buttons to set the recording speed.
SP = standard play; EP = extended play; AUTO = auto.
Auto speed programming is discussed in the Timer
Recording Hints section.
IMPORTANT:
If you press ENTER when you set
the timer recording incompletely,
Current Program
is not completed
will appear on your screen.
If two programmed recording times overlap,
VCR
is already programmed for that time
will display on
your screen for about 3 seconds and then the
Recap screen will appear. The program you have
just set will be highlighted in magenta and flash
for 3 seconds. The start and stop time of the
overlapped program will be highlighted in cyan
color. You will need to erase one of them.