32
KRMU000003
REV A - 07/20/01
DISPLAYING THE TIME GAUGE AND THE REMAINING TIME
, continued
IMPORTANT:
The time gauge and remaining
time work by detecting control signals on recorded
tapes. Therefore, they do not function while
playing blank tapes.
The remaining time display may not show the correct
remaining time:
if the
Tape
function is incorrectly set,
if you are using speed search,
if you are using a special length cassette
(such as T-10 length), or
if you are using a VHS-C tape with an adapter.
The remaining time display may not work correctly depending
on your tape.
DISPLAYING THE CURRENT TIME
The current time is shown in the front panel display or the
monitor. If you have not set the clock, or if there has been a
power failure longer than 3 minutes, the display will show
-- : -- -- . To see the current time when the VCR is on:
1. Press DISPLAY twice. The remaining time display will be
replaced by the current time.
2. To turn off the current time, press DISPLAY again.
CUSTOMIZE CHOICES MENU
In the
Customize Choices
menu, five options can be set.
(Some menu options have been disabled.) For each of the
options, start with these 2 steps:
1. Press MENU on the remote control.
VCR Main Menu
appears on your monitor.
2. Use the ADJUST buttons on the remote to select
Customize choices
. Press ENTER.