21
KRMU000003
REV A - 07/20/01
CONVENTIONAL VCR TIMER RECORDING,
continued
10. The programmed memory will appear on the Recap
screen.
11. To program additional recording times, select an
empty program line by pressing ADJUST buttons.
Press ENTER. The
Program to record
menu will appear.
Continue the programming procedure from step 3.
12. When you are finished with all programming, turn the VCR
power OFF and make sure that the programmed recording
light is lit.
IMPORTANT:
Only 4 of the 8 program lines
appear on the Recap screen at any one time.
To see additional program lines, press the
ADJUST buttons to scroll the lines on the screen.
Canceling a
Recording
in Progress
There are two ways to stop a recording in process:
•
Press STOP on the front panel or on the remote control.
The recording stops but the program is not cancelled.
Therefore, if you press REC, the recording will start again.
•
Press POWER on the front panel. The recording stops
and the program is cancelled.
Changing
while
Programming
To change one of your settings (such as start time) while you
are programming:
•
Press ENTER to move forward or CANCEL to move
backward through the program list.
•
Then use the ADJUST buttons to change the settings.
You will cancel the entire program if you press CANCEL while
the channel number is flashing.
