background image

MOBUS 

2

 

 

THANK YOU FOR PURCHASING “MOBUS”

 

Electric towel radiator heating element with capillary thermostat for water temperature regulation

 

 

CAUTION

 

GENERAL CAUTION

 

 

Read the instructions carefully before install and use MOBUS.

 

 

MOBUS must be installed only by expert technicians and installation must be compliant with all applicable rules,

 

and  national  safety regulations and laws in force in the country where the product is installed.

 

 

MOBUS is intended to be used and installed into a towel rail. Any other use is strictly forbidden and potentially

 

dangerous.

 

 

MOBUS must be fitted before mounting the towel rail to the wall.

 

 

Do not connect MOBUS to the power supply until the installation into a properly filled towel rail is completed.

 

 

MOBUS must only be fitted vertically from the bottom of the towel rail.

 

 

Do not cut the power supply cable to switch MOBUS  OFF.

 

 

Make sure that the power lines are appropriate for the load required.

 

 

MOBUS is designed for use with water, water+glycol filled towel radiators

 

 

Any contact between plastic parts of MOBUS and chemical products or alcohol (including the water or the mixture water+ 

glycol inside the tower rail) must be avoided.

 

 

Installation must be carried out in accordance with conditions described in the Technical specification table (page 4).

 

 

MOBUS power must be carefully selected in proportion to function of the towel rail size and thermal output. To select MOBUS 

electrical power, please refer to the towel rail manufacturer instructions when a certification related to the complete system 

(according to EN 60335-2-43) issued by an European recognized institute (like SEMKO, VDE, IMQ…) is available. In case of 

missing towel rail manufacturer certification, refer to EN 60335-2-43 to determine the correct MOBUS power to be installed in 

the towel rail.

 

 

For any other technical details and requirements, please refer to the distributor/seller.

 

 

In case of any doubts or insufficient information, please do not install or use MOBUS and contact the distributor/seller.

 

 

MOBUS is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of 

experience or knowledge, unless they benefit by a person responsible for their safety, monitoring or instruction on the use of the 

appliance. You should monitor children to ensure that they do not play with the appliance.

 

 

SAFETY  WARNINGS

 

 

 

MOBUS is a class I appliance and is protected against water ingress according to its IP X4 degree of protection. The towel rail 

where MOBUS is fitted must be mounted inside the zone of the bathroom according to its IP degree of protection and electrical 
legislation in force. In case of doubt about the correct installation zone, refer to the relevant public institution.

 

 

Switch the mains off before any installation, de-installation or maintenance operation on MOBUS.

 

 

 

Fig. 1

 

  

 

 

Summary of Contents for MOBUS














Reviews: