9
MOBUS
USAGE
USAGE WARNINGS
The MOBUS incorporates a capillary thermostat bulb sensor to measure the water temperature. The LED is ON when the
heater is working.
WORKING DESCRIPTION
HOW TO USE
MOBUS has a knob which is used to select the desired temperature of the Towel rail water: temperature setting
Between [ 5°C ÷ 70°C ] ± 5°C (Fig. 16).
The LED is ON when the heater is working.
Min. position
5°C ± 5°C
Intermediate
position
Max. position
70°C
± 5°C
Fig. 16
IMPROPER USE
All different usages which are not described in the “PRODUCT PRESENTATION” section according to the USAGE section,
are to be intended as improper usage. In case of doubts refer to the seller.
Never switch the MOBUS ON if the towel rail is empty.
Before installation, never switch the MOBUS ON to verify heating effectiveness.
DANGEROUS CONDITION AND RISKS
During installation, de-installation and maintenance, ensure working place safety until the operation is completed. Don’t use
excessive force to turn the knob as you risk to break it.
In case of anomalous or strange working condition or if MOBUS has visible signs of damage disconnect the MOBUS and
send it to the seller for investigation or replacement. If the MOBUS regulating box shows some plastic cracks, please, contact the
seller for replacement.
MOBUS power supply cable cannot be repaired. If it is damaged, contact the seller to replace the complete MOBUS unit. Never try to modify or
repair the MOBUS in any of its parts by yourself.
Never try to remove the knob as water can penetrate inside the MOBUS regulation box resulting in a risk of electrical shock. Never
knock the MOBUS against anything. Handle with extreme care during every operation and never leave it in wet areas.
