background image

Emergency Service Mode - (Valet Mode) 

This feature will disable the system except for lock, unlock and 
trunk functions. This mode is used  if a remote is misplaced, 
damaged or if the system malfunctions. If the system was 
installed with a starter disable this feature will disable the starter 
disable relay and allow the vehicle to start. 

Activate/ Deactivate Service Mode (Valet Mode)

Method 1

To Activate Service Mode: 

Turn the ignition key to the “On” position then  press and hold the 
Program 

 

Button located on the antenna for 5 seconds. The 

system will chirp the siren

 5

 

 times 

as confirmation.

To Deactivate Service Mode

:

Turn the ignition key to the “On” position then  press and hold the 
Program 

 

Button located on the antenna for 5 seconds. The 

system will chirp the siren

 2

 

 times 

as confirmation.

Ignition 

“On”

5 sec.

Method 2

To  Activate Service Mode:

 

Press and Release the 

Button and then press and hold it until 

the system chirps the siren

 5

 

 times 

as confirmation.

To Deactivate Service Mode:

Press and Release the 

#

 button and then press and hold it until 

the system chirps the siren

 2

 

 times 

as confirmation.

Note: 

The LEDs will be “ON” solid while in Service Mode

  

 

OWNER’S GUIDE                   

SECURITY SYSTEM 

  

  

 

             

Summary of Contents for 640 Series









Reviews: