background image

  

1.Press and release the 

LOCK 

button on the remote transmitter. 

2.The park lights will flash and the siren will chirp one time. 
3.The doors will lock.
4.The LEDs on the antenna will start flashing within five seconds.

1.Press and release the 

UNLOCK 

button on the remote transmitter.

2.The park lights will flash and the siren will chirp two times. 
3.The doors will unlock.
4.The LEDs on the antenna will stop flashing.

1. Press and release the 

UNLOCK

 button on the remote transmitter. 

    The park lights will flash, the siren will chirp two times and 
     the drivers door  will unlock.
2. Press and release the 

UNLOCK 

button again and the remaining 

    doors will unlock.

Note:

 The 

UNLOCK

 must be pressed a second time within 3 seconds.

Lock Doors and Arm Alarm

Unlock Doors and Disarm Alarm

Priority Unlock Feature (Optional Feature)

  

 

 

  

Press and release the 

LOCK

 and 

UNLOCK

 buttons at the same time.

If the doors were locked this will unlock the doors without chirping 
the siren. The park lights will flash as confirmation of lock/ unlocking.

Silent Arm and Disarm

  

 

OWNER’S GUIDE                   

SECURITY SYSTEM 

  

  

 

             

Summary of Contents for 640 Series









Reviews: