Press and hold the
LOCK
and
UNLOCK
buttons for three seconds. The park lights
will flash and the siren will three times.
While the park lights are on strike the vehicle with the amount of force wanted to
trigger the alarm*. Hit the vehicle with the same amount of force three time, the
siren will chirp each time the system detects the Impact.
*Strike the vehicle with the palm of the hand, be careful not to impact the vehicle in
a area that may cause damage. The most common location for testing and setting
the shock sensor is the A-pillar. The A-Pillar is the metal support that runs from the
roof of the vehicle to the hood area.
Shock Sensor Programming/ Adjustment
Method 1
Method 2
Method 1
Method 2
To enter shock sensor programming.
Setting the sensitivity.
Press and release the
LOCK
button five times (once every 1 second).
The park lights will flash and the siren will three times.
NOTE:
To exit shock sensor programming press and release
LOCK
or
UNLOCK.
SECURITY SYSTEM
OWNER’S GUIDE
