background image

Car Finder is a feature that can be used to find your vehicle in a 
crowded parking lot.

1. Press and hold the # button for three seconds. 
2. The park lights will flash and the siren will chirp five times to 
    draw attention to the location of the vehicle. 
3. The remote will beep and display the systems current status.

Car Finder Mode

Activating Panic Mode 

1. Press and hold the 

LOCK

 button for three seconds.

2. The park light will begin to flash and the siren will activate. 
    Panic mode will stay activated for one minute. 

Note: 

If installed the starter disable will activate.

Disabling Panic Mode 

Press and release the 

LOCK

 or 

UNLOCK

 button to disable Panic.

Note: 

If installed the starter disable will deactivate.

Panic Mode

  

1. Press and hold the 

UNLOCK 

button. The system will disarm, unlock

    the doors and within six seconds the trunk release will activate. 
    This will be confirmed by one park light flash and one siren chirp.

Note: 

The trunk release output will not activate when the ignition key

           is in the “On” position.

Trunk Release (Ch 3)

OR

SECURITY SYSTEM                    

OWNER’S GUIDE  

 

             

Summary of Contents for 640 Series









Reviews: