background image

OWNER’S MANUAL

                                                      REMOTE VEHICLE STARTER

      PAGE 10

Cold Start*/Timer Mode

Cold Start*/Timer Mode will start the vehicle at a user selectable start interval or 
temperature setting. The vehicle can be set to start once every 2, 3 or 4 
hours in Timer Mode 

or  

-5,-15 or -25 Celsius in Temperature Mode

*, 

for a 

maximum of 12 starts. The vehicle will start at the selected start interval/ 
temperature and run for the programmed runtime

**

Example-

 

Timer Mode

. If the 4 hour start cycle was selected, the vehicle will 

start once every 4 hours and run for the programmed runtime

**

Example-

 

Temperature Mode*

. If the -15 Celsius start cycle was selected, 

the system will monitor the temperature (every 2 hours) until it falls below -15. 
The remote starter will start and run for the programmed runtime**.

 

NOTE: 

The optional Low Temp sensor* must be installed for the temperature     

             settings to be available.

To Enter Cold Start*/Timer Mode.

Method 1-

 Press and release the 

 

 

button, then press and hold the  

 button         

                   for 6 seconds or until park lights turn on.

While the  park lights are on the start cycle  can be selected.

2 hour   or   -5C/ 23F                 Press  

 button                   2 Park light flashes

3 hour   or   -15C/ 5F                 Press  

 button                 3 Park light flashes

4 hour   or   -25C/ -13F              Press 

 

 button                    4 Park light flashes

NOTE: 

Cold Start*/Timer Mode must be set each time the user wishes to use this feature.  

To Cancel Cold Start*/Timer Mode
Method 1- 

Press and release the 

 

 

button, then press and hold the  

 

button    

                  for 6 seconds.

NOTE: 

Pressing the brake

 

pedal or turning the ignition to the ON position will 

            cancel Cold Start/Timer Mode. Cancellation will be confirmed with 2 park
            light flashes and 2 siren chirps .

Never remote start or set the Cold Start Mode if the vehicle is parked in a 
Garage or Attached Carport! (see page 4 SAFETY)
                                                                                            *LT models ONLY
                                                                                            **Default 15 minutes 

Summary of Contents for 45xx Series





















Reviews: