3) Press the up button ( ) to increase
or the down button ( ) to decrease
TIME or TEMPERATURE. Hold
button down for faster display
changes.
4) After five seconds, the new numbers
will be saved and the oven will display
new settings.
4) Après cinq secondes, les nouveaux
nombres seront sauvés et le four montrera
de nouveaux arrangements.
3) Tenez "vers le haut" bouton (
) pour
augmenter ou "vers le bas" boutonnez
(
)
pour diminution de le TEMPS ou
TEMPÉRATURE. Maintenez le bouton pour
des changements plus rapides.
1) Press the up and down buttons
(
) at the same time, hold for four
seconds until TIME display is blank.
2) Press the enter button ( ) to
switch between TIME and
TEMPERATURE.
Adjusting TIME and TEMPERATURE:
If burner does not light in one minute
push the power switch to the "OFF"
position and wait five minutes.
After five minutes, retry.
Push power switch "ON."
To Start:
2) Appuyez sur le bouton de "entrée" ( )
pour commuter entre le TEMPS et la
TEMPÉRATURE.
1) Tenez "vers le haut" et "vers le bas"
boutonne (
) en même temps. Tenez
les boutons pendant quatre secondes
jusqu'à ce que l'affichage de la
TEMPS soit blanc.
Après cinq minutes, nouvelle tentative.
Si le brûleur n'allume pas en une minute,
poussée le commutateur de puissance dans
la position de "ARRÊTE" et attend 5 minutes.
Poussez le commutateur de puissance à
"MARCHE."
OFF / ARRÊTE
Ajustement du TEMPS et de la
TEMPÉRATURE:
Pour Commencer:
ON / MARCHE
SWITCH CUTOUT
IL1050
Please take time to read the following safety operating
instructions. They are the key to the successful
operation of your Ultra-Max Conveyor Oven.
SAFETY TIPS
For your safety, read before operating.
If you smell gas:
1. DO NOT try to light any appliance.
2. DO NOT touch any electrical switches.
3. Use an exterior phone to call your gas supplier
immediately.
4. If you cannot reach your gas supplier, call the fire
department.
In the event of a power failure:
1. Turn all switches off.
2. DO NOT attempt to operate the oven until the
power is restored.
NOTE: In the event of a shut-down of any kind,
allow a five (5) minute shut-off period before
attempting to restart the oven.
General Safety Tips:
1.
DO NOT
use tools to turn off the gas control.
If the gas cannot be turned off manually do
not try to repair it. Call a qualified service
technician.
2. If the oven needs to be moved for any reason,
the gas must be turned off and disconnected
from the unit before moving the restraint cable.
Reconnect the restraint after the oven has been
returned to its original location.
3.
DO NOT
remove the control box cover unless
the oven is unplugged.
OPERATION
To turn the oven on:
1. Push the power switch to "ON."
2. If the burner does not light in one minute,
push the power switch to the "OFF" position
and wait five minutes.
3. After five minutes, retry.
To adjust the time and temperature:
1. Press the DOWN and UP arrows (
) at the
same time. Hold for four seconds until the TIME
display goes blank.
2. Press the ENTER button (
) to switch between
TIME and TEMPERATURE.
3. Press the UP arrow (
) to increase or the
DOWN arrow (
) to decrease the TIME or
TEMPERATURE. Hold either button down for
faster display changes.
4. After five seconds, the new numbers will be saved
and the oven will display the new settings.
To turn the oven off:
1. Push the power switch to "OFF." The oven is
equipped with a cool-down feature for motor shaft
and bearing protection. This enables the blower
motor(s) to run regardless of the controller status.
The blower(s) continue to run until the oven cools
to a safe temperature.
10
