115
GB/MT
Because of this you may need
to switch the car power
inverter
1
on and off several
times, in order to be able to
switch a television on.
If you have any doubts, please
contact the manufacturer of the
connected device.
z
Signal if the battery
voltage is low
If the battery voltage sinks
below 10.5 V, the car power
inverter switches off
1
and
the overload display
3
lights
up red. A warning beep
sounds.
z
Charge USB device
Attention!
Before connection, make sure
that the current draw of the USB
device is not higher than 1A. For
more detailed information, please
refer to the operating instructions
for your USB device.
Plug the USB plug of the USB
device to the USB connection
6
of the car power inverter
1
.
If necessary, switch the USB
device on.
Note: The 230 V socket
5
and
the USB connection
6
can be
used at the same time.
z
Replacing the fuses
Danger to life
through electric
shock!
Before replacing the fuse,
disconnect the car power inverter
1
from the power supply. Also
remove any device connected to
the car power inverter
1
.
Replace the fuse with one of equal
value with the same cut-off char-
acteristics (20 A), as given in the
technical specifications.
Instructions for operation
351562_2007_Spannungswandler_content_LB5.indb 115
351562_2007_Spannungswandler_content_LB5.indb 115
13.11.20 14:45
13.11.20 14:45
