111
GB/MT
A gap of 50 cm must be
maintained behind the
ventilation slots of the
fan
14
.
There are holes
15
in the
plastic base of the car power
inverter
1
so that it can
mounted securely in a vehicle.
Using suitable screws, the car
power inverter
1
can be
securely mounted. When doing
this make sure you maintain
the space for air circulation as
stated above.
Due to vehicle-specific factors,
it is not possible to include fit-
tings which fit all situations.
If you are unsure, contact your
motor vehicle garage.
z
Operation in a vehicle
If you are operating the car power
inverter
1
in a vehicle, make
sure that the installation does not
impair your driving. You should
therefore always lay the cable so
that it does not touch any moving
parts inside the vehicle and does
not obstruct your vision.
Note:
The car power inverter
1
can
also be operated with the engine
switched off. But please note that
the car power inverter
1
may
possibly not work when you are
starting up the engine.
z
Connecting to a voltage
supply
Attention!
Before connecting the car power
inverter
1
to a voltage supply,
make sure that the On/Off switch
4
of the device is in the “0” (OFF)
position. You can connect the car
power inverter
1
to a 12 V socket
for the electrical system using the
12 V plug
12
or clamp the cables
with
10
and
11
connecting clamps
directly to a car battery.
Instructions for operation
351562_2007_Spannungswandler_content_LB5.indb 111
351562_2007_Spannungswandler_content_LB5.indb 111
13.11.20 14:45
13.11.20 14:45
