ujk technology 717127, Original Instructions Manual

Page: 9 / 40

Optional Accessories
9
6) UJK Technology Router Elevator
(Code 502701)
The UJK Technology router elevator is a logical solution for
fast, accurate production on many router table installations.
This compact design was developed by us to fit straight
into our own router tables and most table set-ups can
accommodate this size of insert (305 x 229 x 6mm). The unit
can be made to fit flush into the tabletop by the provision
of levelling screws at each corner of the table insert. Height
adjustment is carried out by inserting a handle through a
measurement dial set into the machine table. Each rotation
of the handle raises or lowers the cutter by exactly 2mm
and the integral scale is graduated into increments ena-
bling very accurate adjustments to be carried out.
7) UJK Technology Dust
Extraction Box
(Code 502538)
• Dust collection device.
• Efficient extraction from above and below the table.
•Access door with magnetic catch.
•63mm extraction hose included.
•100mm outlet.
Dust extraction from a router table can be difficult and for it to
work effectively it needs to extract from both above and below
the table. Designed to fit the UJK Technology Pro and Compact
router tables this device fits below the table top enclosing the
router. It could also be fitted to other custom made tables of
your own design. The 100mm diameter outlet on the back also
incorporates a 62mm inlet and hose which enables extraction
from both above and below the table simultaneously. An
access door is provided on the front with a magnetic closure
enabling access to your router for adjustments if required.
Measures 330 x 260 x 350mm high with an access aperture of
225 x 170mm.
Continues Over...
8) UJK Technology Off Set Bars for Router Tables
(Code 103561)
A pair, these H-section extrusions fit behind the outfeed
fence of the UJK router table fence. Once in position they
give you an exact 1mm offset between the infeed and
outfeed fences. Their clever design means you can rotate
each extrusion by 180° and reinsert them in position to
achieve an exact 2mm offset.