ujk technology 717127, Original Instructions Manual

Page: 16 / 40

Assembly
16
Step 7 Locate the wheel support bracket (H), lineup holes
in the bracket with the threaded holes to the base of the
upright supports (A) and secure using four M8 bolts and
washers (1-2), see fig 07-08.
Fig 07-08
Fig 09-10
H
1 2
4
Step 8 Locate the four adjustable feet (4), turn over the
stand assembly and screw each foot into the
base of the upright supports, see figs 09-10.
(Leave loose for adjustment later)
Mobility Wheel Assembly
Step 9 Locate the mobility wheel assembly (J), remove the
five Hex bolt and washers and place safely aside. Separate
the back plate from the main assembly, place the back plate
inside the support bracket (H) and line up the holes.
Offer up wheel assembly to the front of the support
bracket (H), lining up the holes, secure using the Hex bolts
you removed earlier, see figs 11-13.
Fig 11-12
Hex bolt/washers
Wheel assembly
Back plate
H