ujk technology 717127, Original Instructions Manual

Page: 15 / 40

Assembly
15
UJK Router Table Leg Stand Assembly
Step 1 Locate the bag of bolts (M6x12mm) (1), flat washers
M6 (2), upright supports (A) and the upper side panels
(long) (B). Secure one of the side panels (B) to the top of
the upright supports (A) with the M6 bolts and washers, see
fig 01. (lightly tight)
Step 2 Locate one of the lower support brackets (long) (D)
and secure to the upper supports (A) as shown in fig 02.
Repeat for the opposite side.
Fig 01
1 2
B
A
Fig 02
1 2
D
Step 3 Locate the upper side panels (short) (C) and lower
support brackets (short) (E). Secure the lower support
brackets (E) to the two front panels you already assembled
and lightly tighten, see figs 03-04.
D
Fig 03-04
E
E
Step 4 Secure the upper side panels (C) to the front panels
and lightly tighten. (See fig 05) Now go round the stand
and tighten all the M6 bolts, see fig 06.
Fig 05
Fig 06
C
C
Continues Over...