ujk technology 717127, Original Instructions Manual

Page: 11 / 40

Optional Accessories
11
11) UJK Technology Professional Laminated
Blank Router Table Top
(Code 102546)
This UJK Technology Professional Blank Laminated Table
Top is pre-drilled to fit directly onto the UJK Technology
Professional router table leg stand. The top measures 800
x 600mm and provides you with a well sized assembly or
work table. It is a high grade birch ply with a hard wearing,
low friction, phenolic laminated surface. The ply core will
always remain flat and the phenolic surface is very hard
wearing ensuring the top has a long working life.
13) UJK Technology Twist Dogs (Pair)
(Code 102541-102542)
UJK Technology Twist Dogs are of a unique design. Their
25mm long spigot is a snug fit in the 20mm diameter dog
holes of the UJK Technology MultiFunction Workbench and
the Festool MFT bench. The Twist Dog’s unique feature is
a pin through the spigot. This pin securely locks the Twist
Dog into the specially drilled holes of the UJK Technology
Multifunction Workbench. (The pin is removable, allowing
the Twist Dog to fit into any 20mm dog hole). Made from
hard acetate plastic (the same material as shatterproof
chisel handles), these dogs will not damage cutting edges
in the case of accidental contact. Twist Dogs are highly ac-
curate and acetate plastic a very stable material. The upper
portion is a precise 25mm diameter with a choice of either
18mm or 40mm protrusion. Twist dogs use the alignment
of the UJK Technology MultiFunction or Festool MFT table’s
holes to set up fences, guide rails or workpieces.
12) UJK Technology Professional Valchromat Router
Table Top for Twist Dogs
(Code 102548)
This top provides you with the option of building and
using a more compact multifunction workbench. This UJK
Technology Professional table top is 18mm thick
Valchromat, pre-drilled to fit directly onto the UJK
Technology Professional router table leg stand. Valchromat
is not MDF it is a type HDF. Valchromat has greater internal
cohesion, higher mechanical strength and is more moisture
resistant than MDF. The top measures 800 x 600mm and
has a grid of 20mm Twist Dog holes: 7 holes by 5 holes.
These holes are CNC machined to guarantee accuracy,
aligned lengthways and widthways with the rows perfectly
square to each other. Twist Dogs lock securely in the holes
and won’t rock or budge until released. These 20mm
diameter holes also allow the use of Parf dogs and many
other accessory clamps, guide rails and stops to hold, saw,
rout and machine your work with spot-on accuracy.
102541
102542