Uhlenbrock Elektronik IntelliLight LED, Manual

Page: 9 / 12

- 9 -
8.1 Calling up a Control Module with an Intellibox II

Connect the module to the LocoNet.

Press the [mode]-Key to access the main selection Menu:

Press the "LocoNet Programming" button:

Press the "Part number" button, and enter the part number of the IntelliLight LED
control module (here 28200) and press the [

]-key.

Press the "Module Number" button, enter the module address for the module (in a
new module this is 1) and press the [

]-key:

Press the "Prog.mode on" button:

Now the IntelliLight LED Control module is in Programming mode.