- 11 -
Exit the Programming Menu "Back". After that return to the Controller mode with the
[mode]-Key.
NOTE: For other LocoNet centers there are similar procedures for LNCV
Programming. Use the precise steps outlined in the corresponding manual.
8.3 The Universal Address 65535
With the universal address can call up all IntelliLight LED modules.
The universal address is not a valid address that can be used for identifying different
IntelliLight LED modules. It can only be used for calling up modules whose real
address is not known. For this only the particular module that is being tested can be
connected to the LocoNet. If the module is then called up the current address can
then be read from LNCV 0.
9. LNCV Table
LNCV Description
Value
Range
Factory
Default
0
Module address
1-65534
1
1
Solenoid address for sunrise (green) and
sunset (red)
1-2000
192
2
Solenoid address for Random event 1 (red)
and 2 (green)
1-2000
193
3
Solenoid address for Random event 3 (red)
and 4 (green)
1-2000
194
4
Solenoid address for Random event 5 (red)
and 6 (green)
1-2000
195
5
Solenoid address for Random event 7 (red)
and 8 (green)
1-2000
196
6
Solenoid address for Service mode
green = on, red = off
1-2000
197
7
Reduction of the model time relative to the
standard time factor 1: (100/LNCV value)
5 -100
5
8
Reduction of the events relative to the
standard time factor 1 : (100/LNCV value)
5 -100
5
9
Time when starting the system.
An LNCV value of 1330 corresponds to the
time of 13:30
0-2400
700
2047 Software Version (read only)
-
varies.
Changing of the timed sequences and individual events are outlined in the technical
description. This is available as a PDF Document for download from our internet site
www.uhlenbrock.de.
Summary of Contents for IntelliLight LED
Page 1: ...1 Manual...
