UFESA BS4704, Operating Instructions Manual

Page: 7 / 37

ENGLISH
1. Filling cup (Max: 30ml)
2. Lid
3. Glass
jug
4. Seal ring
5. Blade unit
6. Jug base
7. Motor coupling
8. Control knob
a) Setting 0
b) Setting 1
c) Setting 2
d) Turbo setting
9. Indicator lamp
10. Motor housing
SAFETY INSTRUCTIONS:
• Read these instructions carefully before using
the appliance for the fi rst time. Safeguard
them for future reference. Inobservance of
these instructions may lead to an accident.
• Only connect it to the voltages stated on the
characteristics plate.
• This appliance is suitable for use with
foodstuffs.
• This appliance has been designed exclusively
for domestic use.
• Always use the blender on a fl at, level work
surface.
• This appliance must not be used by persons
(including children) with physical, sensory or
mental impairments unless they have been
instructed in its correct use by a responsible
adult.
• Do not allow children to use the blender
without supervision.
• This appliance is intended to be used in
household and similar applications such as:
– staff kitchen areas in shops, of fi ces and
other working environments;
– farm houses;
– by clients in hotels, motels and other
residential type environments;
– bed and breakfast type environments.
• Do not handle the appliance with wet hands.
• Avoid contact with the moving parts.
• The edge of the blade is very sharp. To avoid
injuries handle the blades with extreme care
when cleaning them.
• Never insert metal utensils, such as knives
or forks, into the inside of the jug while the
appliance is operating.
• The use of accessories not supplied by the
manufacturer may cause accidents.
• Do not operate the appliance without a
workload.
• Do not leave the appliance close to heat
sources nor allow the cable to come into
contact with hot surfaces.
• Do not operate the appliance with the cable
still coiled.
• Never try to fi t or remove the jug on the
blender while the appliance is still running.
• Unplug the appliance before attempting to
change any accessory or accessing any
part of the liquidizer that might move during
operation.
• Do not open the lid on the blender until the
motor has stopped.
• Do not leave the appliance operating
unattended, especially with children about.
• Unplug the appliance from the mains when it
is not in use.
• Do not unplug it by pulling on the cable, nor
leave the plug hanging freely.
• Make sure that the appliance is unplugged
before cleaning it.
• DO NOT IMMERSE THE MOTOR HOUSING
INTO WATER OR ANY OTHER LIQUID.
• Do not use the blender if the blade is
damaged.
• Do not switch the appliance on if the cable or
the plug are damaged or if it can be detected
that the appliance is not working correctly.
• Never use the appliance outdoors.
• ATTENTION: To reduce the risk of
fi re or
electric shock, never remove any of the covers.
There are no user serviceable parts on the
inside. Cable repairs and replacements must
be carried out exclusively by an Authorized
Technical Service Centre.
ASSEMBLY OF THE PARTS
Before using it for the fi rst time, use soapy water
to wash all the pieces that are going to come
into contact with foodstuffs.
The edge of the blade is very sharp. To avoid
injuries clean it with extreme care.
- Fit the rubber seal ring (4) over the blade unit
(5). (Fig1)
- Put the blade unit (5) with sealing ring into the
jug base (6). (Fig2)
- Mount the glass jug (3) onto the jug base unit
and turn the jug base anti-clockwise until it is
fi xed. (Fig3)
- Place the jug unit onto the motor housing (10).
(Fig.4)
- To fi t the lid (2) onto the jug (3) insert it into the
top of the jug and press down on it so that it