26
d.
To save the RPM, touch the Save icon. The RPM will be transferred to the DMS
software later.
e.
Touch the Exit icon to exit.
NOTE:
The RPM data will be stored in the “RPM” field under the “Record Information” tab
once the data is transferred from the UP15000 into the DMS software.
BLUETOOTH
To enable Blutooth go to settings There are two o
ptions; “Enable” or
“Disable”.
This option allows for connection of the audio feed to be
connected to a Bluetooth headphone or earbuds. If this is enabled, a
Bluetooth icon will appear in the Setup screen.
TRIGGER SWITCH
The Trigger Switch is used to display the active dB reading. To observe the active dB
reading, pull the trigger and hold it. For example, when scanning a leak or electric
emission, pull the trigger in and scan the test area until you want to freeze the reading
for storage or review. At that moment, release the trigger. To store the dB frozen on the
screen, select the Save icon.
The trigger can also be used to turn on the Laser Pointer.
NOTE:
The Laser Pointer will work only if it has been set to ON in the setup menu.
QUICK CHANGE BATTERY
To insert the battery
, align the battery with the handle
(arrow pointing towards the trigger) and push in until the clips
snap in place.
To remove the battery
, push firmly on the battery clips with the fingers of one hand
while holding your other hand under the handle to catch the released battery.
WRIST STRAP
To protect the instrument, against being dropped accidentally, use the wrist strap.
