19
9.
RECORDING A SOUND:
a.
Locate and touch the Spectra (FFT) icon
b.
Touch/tap (Record)
c.
If the timed recording has been selected in the Settings/Set Record Time, the
recording process will stop at the selected time
d.
If the Settings/Set Recording Time is in the Manual mode, to stop recording,
touch/tap STOP.
e.
You will be asked: Save WAV File, Yes or No. To save, touch/tap Yes.
f.
To activate the Spectra screen when not in the Record Mode, touch/tap
(START) to run the spectra (if STOP is shown the spectra screen is operating. To
stop the spectra screen from running, touch/tap the STOP button). Every time the
START button is tapped to run the spectra screen, you will be observing an
averaging of the spectra on the screen. When it is stopped and restarted, the
averaging process begins again.
10.
CAPTURING THE SPECTRA SCREEN IMAGE:
The Image of the selected spectra screen can be saved for viewing or entering in a report. To
capture the screen image:
a.
Check the top left of the spectra screen to be sure you are at the desired Record
number.
b.
Touch the CAPTURE tab
c.
Select Yes to save.
11.
ENTERING TEST DATA:
a.
Locate the Input Data icon
b.
The Test data information will vary with each application. The title of the
information will be shown in the upper left part of the screen
c.
To move from one selection to another, use the Left/Right arrows
d.
Touch/tap the screen of the desired data (ex: RPM or TEMP)
e.
Use the UP/DOWN arrows to enter the desired data
f.
These input data fields are set (and may be changed) in Ultratrend DMS,
12.
VIEW RECORD:
a.
A record can be viewed in an operational screen. If the record number displayed is
not the record you want to read:
b.
Touch/tap the Record box
