11
5.
You may use the camera function to capture images of test points or items of interest that
will be used in your reports.
CAMERA:
6.
This non-contact thermometer will measure the temperature of your test points. It can be
used in the Temp screen and in the dB/Temp screen.
INFRARED THERMOMETER:
7.
The Laser pointer is a class II (for Europe) or a Class IIIa (elsewhere) type laser DO NOT
POINT IT AT EYES. To activate it, enter the setup mode, select the “Oper” tab and look
for Trigger Features. Touch the Trigger Features box. Then using the arrows, move up or
down until Trig & Laser ON/OFF is shown. Touch the box to select and exit
LASER POINTER:
8.
Slide the Battery into the Handle until it “Clicks” in securely
BATTERY:
9.
TEST MODULE RECEPTACLE
:
Plug in all test modules here.
SETTING UP THE ULTRAPROBE 15,000
I.
a.
The instrument will not open without the SD card placed fully into the slot.
TURN ON THE ULTRAPROBE 15,000
b.
To turn the instrument on, press and then release the ON/OFF button
as shown.
II.
a. The Home Screen will display the Icons for operating your Ultraprobe 15,000.
HOME SCREEN:
In order to select an operating screen, you must enter the Home Screen.
Battery
Battery Clip
Camera and Flash
Laser Pointer
Infrared Thermometer
Screen displays image and test data
