Udirc U42W, User Manual

Page: 5 / 24

5
5. Check List Before Flight
(1) Make sure the drone battery and transmitter battery are fully charged.
(2) Make sure the Left Stick of the transmitter in the middle position.
(3) Please strictly obey the order of turn on and turn off before operation. Turn on
the transmitter power first and then turn on the drone power before flying;
turn off the drone power first and then turn off the transmitter power when
finish flying. Improper turn on and turn off order may cause the drone out of
control and threaten people’s safety. Please cultivate a correct habit of turn on
and turn off.
(4) Make sure the connection is solid between battery and motor etc. The
ongoing vibration may cause bad connection of power terminal make the
drone out of control.
(5) Improper operation may cause drone crash, which may arouse motor defective
and noise, and then effect the flying status or even stop flying. Please go to
the local distributor to buy new parts for replacement so that the drone will
return to its best status.
Li-Po Battery Disposal & Recycling
Wasted Lithium-Polymer batteries must not be placed with household trash.
Please contact local environmental or waste agency or the supplier of your
model or your nearest Li-Po battery recycling center.
4. Charging Instruction for Drone Battery
Power Bank Phone Charger
Computer Charging Car Charger
* For faster charging, it is recommended to use a adapter with 5V 2A output current (not included)
to charge the battery
Drone Battery
1. Connect the drone battery with USB cable first and then choose one of the
method as below picture shown to connect with USB plug.
2. The red USB indicator light keeps bright when charging. And the light turns
green when fully charged.