Udirc U42W, User Manual

Page: 14 / 24

14
Low Battery Alarm
When the drone in low battery, the transmitter will beep constantly to remind the
user to land the drone as soon as possible. The flip function will turn off
automatically when the drone in low battery.
When the transmitter in low battery, the transmitter will beep to remind the user to
land the drone to replace the batteries as soon as possible. Or the drone may out
of control.
Propeller Installation Diagram
Out of Range Alarm
When the drone flying out of the max remote control distance, the transmitter will
beep to alarm the user to fly back the drone immediately. Or the drone may out of
control and fly away.
Propellers Stuck Protection
(1). When the drone propeller was stuck, the drone body lights flash rapidly and
the propellers stuck protection function turn on automatically. The motor will stop.
(2). Move the left stick to the lowest end to turn off propellers stuck protection
function. The drone body lights get solid bright and the drone is ready to fly.
Remove the propeller cap and screw from the propeller,
then remove the propeller.
To install the propeller, aim at the hole and press the
propeller down to the end, then lock the propeller by
attached screw. Press down the propeller cap.
Propeller Guard Installation Diagram
Install the propeller guard to the drone and lock the
propeller guard by attached screws.
Remove the screw from the propeller guard and pull
out the propeller guard with moderate force.
Note: Fly the drone without the propeller guard can
improve the power and flight time.
Camera Installation Diagram
To install the camera, aim at the buckle in the
drone and push the camera with moderate force.
To remove the camera, pull out the camera from
the buckle with moderate force.
9. Spare Parts Installation Instruction
Front
Rear