udir/c Swan U42, Operation Manual

Page: 9 / 28

When install the propeller guard, attach one buckle to the arm and then push
another buckle in until they locks (Picture 11).
When remove the propeller guard, take it out from buckles on both sides and pull
out the propeller guards.
Propeller guards assembly instruction
When install, push the battery to the end(Picture 12);
When disassemble,you need to squeeze up and down of the battery buckle and
then put out the lipo battery box is fine.
Battery installation diagram
www.udirc.com
Picture 12
Picture 13
Sticker face up
Picture 11
Push here
Battery buckle
9