www.udirc.com
APP CALIBRATION( After pairing successful)
Take Off
Move the right ball outward 45 degree
(Do not touch the left ball). The drone body
light will flash 3 times, and then become
solid , indicating calibration is complete
and the drone is ready to be controlled.
Tips: Crashing the drone may cause it to become imbalanced beyond the level
that can be adjusted by the trimmer button. If this occurs, you can do the
connection with Wi-Fi , pairing and calibration again.
Move the left ball up slowly, the drone will
take off.
Move the left ball and right ball at the same
time 45 degrees inward to active the motors.
( This operation is used for starting/locking
the motor. When the motor is working, it
could be used to stop the motor urgently)
Landing
You can repeat above steps to be familiar about the APP interface.
Move the left ball down to the lowest
position. The drone will land.
22
Summary of Contents for Swan U42
Page 1: ...Operations Guide U47 NOVA Equipped with WIFI Camera ...
Page 28: ......
